Welcome to the official website of ciyi electronic technology co.,Ltd

Product

Ferrite Magnet, Ceramic Magnet

Ferrite magnet or ceramic magnet is the cheapest magnetic material available with the lowest cost/energy ratio, also known as Ceramic Magnets, they are mainly Strontium based (SrFe2O3), manufactured with Strontium Carbonate additive to increase performances from the obsolete Barium based (BaFe2O3). Their good coercive force results from high crystal anisotropy of Strontium iron oxide. However, isotropic parts can also be produced where a simple and easy multi-pole magnetization is required. 
The most common shapes are simple, such as blocks, cylinders, rings and arcs. Ferrite is not conductive and has high resistance against corrosion, acids, salts, lubricants.

Product Description

Product nameFerrite Magnet, Ceramic Magnet
MaterialThe cheapest magnetic material,main contents including ferric oxide ,barium and strontium.
Grade & working TemperatureGradeMax. Operating Temperatures
Y10T250°C
Y25250°C
Y30250°C
Y33250°C
Y35250°C
Y30BH250°C
Y35BH250°C
SizeCustomized size 
ShapeDisc,Cylinder,Block,Ring,Countersunk,Segment,Trapezoid and Irregular shapes and more.Customized shapes are available
FeatureA low cost alternative to other magnetic materials, offers relatively high operating temperatures and good resistance to corrosion& demagnetization. However, it has lower energy levels (Br) and is brittle in nature.
Size tolerance±0.05mm for diamater /thickness, ±0.1mm for width/ length
ApplicationsDc motors, Louderspeaks, Magnetic Separators, Automotive Sensors, Educations, etc
DescriptionFerrite magnet or ceramic magnet is the cheapest magnetic material available with the lowest cost/energy ratio, also known as Ceramic Magnets, they are mainly Strontium based (SrFe2O3), manufactured with Strontium Carbonate additive to increase performances from the obsolete Barium based (BaFe2O3). Their good coercive force results from high crystal anisotropy of Strontium iron oxide. However, isotropic parts can also be produced where a simple and easy multi-pole magnetization is required. 

The most common shapes are simple, such as blocks, cylinders, rings and arcs. Ferrite is not conductive and has high resistance against corrosion, acids, salts, lubricants.